Limited time offer, multi-function laser level

• Complete Design with 3 360° Line Lasers: One 360° horizontal plane and two 360° vertical planes allow users to cover the floor, wall, and ceiling around the room. With our smart pendulum system, this laser level tool self-levels and indicates an out-of-level condition while the pendulum is unlocked.

• Dual Power Supply & Type-C Charging Port : Huepar B03CG laser level employs a large capacity 3.7V/5200mAh lithium battery and provides up to 8 hours of runtime. The lithium battery comes with a Type-C charging port which can be charged separately. By taking out the battery, the laser tool can be used on the jobsite by plugging it in.

• Brighter Green Laser & Outdoor Pulse Mode: Under the same power, the green laser is twice as bright as red laser, with a working range up to 25m (300 LUX) accuracy within ±3mm at 10m. Outdoor pulse mode can be activated by pressing the pulse mode button, allowing the laser range to be extended up to 60m with Huepar line laser detector.

• More Installation Methods: The laser level comes with 1/4"-20 thread to fit standard tripod or laser mounting pole. Equipped with magnetic rotating base, the laser tool can be rotated to the required angle. And the 1/4"-20 and 5/8"-11 mounting threads help to mount it on different tripod threads. Two strong magnets allow attachment to metal track and steel.

• Durable Design & Package Contents: The laser level is fully covered with soft TPR rubber, providing a smooth feel and stronger protection. The kit comes with a hard case, providing a much more convenient way to carry and store the laser level. The package includes a laser level, a lithium-ion battery with a Type-C charging port, a magnetic mount, a Type-C power cable, a power adapter, a target plate, and a user manual. 

Huepar 3x360 Green Beam 3D Cross Line Self-Leveling Laser Level Tri-Plane Leveling and Alignment Tool, Li-ion Battery with Type-C Charging Port and Hard Case Included - B03CG Pro 

B03CG 3x360 Green Laser Level Specifications:

• Laser class: Class 2 (IEC/EN60825-1/2014), power output <1mW.

• Laser wavelength: 505-520nm

• Horizontal/Vertical Accuracy: +/- 1/9 inch at 33 feet

• Leveling/Compensation Range: +/-4°

• Operating Distance (Line): 130 ft (100 LUX), 200 ft with Huepar LR-5RG/LR-6RG receiver

• Operating time: 6 hours of continuous use with all laser beams on

• Power supply: 5200mAh lithium-ion battery

• IP Rating: IP54 dustproof, waterproof and shockproof, reliable and durable

• Operating temperature range: 14℉~122℉ (-10℃~50℃)

• Storage temperature range: -4℉~158℉ (-20℃~70℃)

• Mount Size: 1/4"-20

Almost Unlimited Field of Application:

• A 360° horizontal plane and two 360° vertical planes allow users to cover the floor, wall, and ceiling around the room.
• You can use the intersection of laser lines to project reference points and divide surfaces at right angles.
• Short press the operation button to change the laser line combinations in turn.
• The three laser lines can be individually selected depending on the jobsite applications.

Energy-saving outdoor pulse mode:

• Turn on pulse mode: After power on, short press the "P" button to turn on/off pulse mode.
• Pulse mode extends the working range up to 60m in brighter working conditions when used with the Huepar Laser Line Detector.
• When pulse mode is activated, the laser beams are dimmer, eye pressure is lower when working at close range, and working time can be appropriately extended.
• It is compatible with Huepar LR-6RG / LR-5RG line laser receiver (only need to purchase separately).
• Keep pulse mode on when using with a receiver.

Type-C charging port: 

• This laser tool uses the included large capacity 3.7V/5200mAh lithium battery and provides up to 8 hours of run time.
• The lithium battery with Type-C charging port can be charged separately.
• Direct Input Charging: By removing the battery, the laser tool can be used on the jobsite by plugging it in.
• Four battery indicators on the keyboard allow users to know the current battery volume.
• Charging protection helps prevent overcharging.

More installation methods: 

• A 1/4"-20 female thread on the laser level can help to mount it on the tripod or laser mounting post.
• 360° Strong Magnetic Pivot Base:  Allows it to be adsorbed on metal and steel tracks. The base provides 360° free rotation to meet different angle requirements.
• 1/4"-20 and 5/8"-11 mounting threads on the bottom of the mount for temporary fixing in place or attachment to a tripod or laser mounting pole.
• Replaceable Protective Cover:  Laser windows can be removed and replaced with a screwdriver.
• Green target plate:  Increases the visibility of the laser beam.

Self-Leveling Mode & Manual Mode

Self-Leveling Mode

• When the laser tool is moved to the unlocked position, self-leveling mode is enabled.
• The laser beam will flash when the tool is beyond the self-leveling range ±4°.

Manual Mode 

• When the pendulum is locked, the laser tool can be positioned to align at any angle.
• The laser beam will flash every 3-5 seconds to remind you that it is not self-leveling now.

Bright Green Laser Diode:

• This cross-line laser adopts Osram's bright green laser unit, which is resistant to temperature changes and has higher stability.
• With the same power, the green laser is twice as bright as the red laser, with a working range of up to 25m (300 LUX) with an accuracy of ±3mm at 10m.

Flat top deck design:

• Designed with a flat top cover, this laser tool projects 360° laser lines for tile or ceiling installation 10mm from the wall and ceiling.
• The Huepar PV10+ mount is recommended for quick setup in wall and ceiling applications.
• The laser windows can be removed and replaced with a screwdriver.

Durable Design:

• The laser tool is fully covered by soft TPR rubber, which provides a soft touch and stronger protection.
• The kit comes with a hard case that provides much more convenience for carrying and storing the laser tool.
• IP54 water/dust resistance ensures it works well in hazardous working conditions.